วันพฤหัสบดีที่ 5 กุมภาพันธ์ พ.ศ. 2552

Do You Need a Part for Your Harley Davidson Motorcycle?

Need a Harley Davidson Part for your ride?

<B>Where do you get a good quality Harley Davidson Part? Can I use an aftermarket part?

These questions are not easy to answer. It depends a lot on your situation, part you're looking for, and the money you want to spend.

The bottom line......... you have to decide.

I have a little information here that may be useful to you, so keep reading!

<B>An OEM part versus an aftermarket part.

An <B>OEM (Original Equipment Manufacturer) part are of course the genuine Harley Davidson Part you would find at an authorized Harley dealer.

These parts are original in that they have the exact same specifications that came with the original part.

These parts however many not have been manufactured by Harley Davidson themselves (at their physical location). Harley may get another company to manufacture these parts to Harley specs, and then they will sell them in the Harley box as OEM.

OEM parts are generally more expensive, and almost always recommended by the dealer. (They make their money by selling parts not bikes)

The dealer will most likely tell you that OEM parts are of a higher quality. This may or may not be true.

An <B>Aftermarket part should perform as well as an OEM but take note. These parts were made by a company other than the original manufacturer.

Sometimes after a certain time period the original manufacturer of a part will allow the company that physically manufactured the part to sell it at a reduced price and in their own packaging. The part now becomes an OEM aftermarket part.

Normally after a certain period of time, the manufacturer will allow the company that originally designed/produced the part to sell it in their own box at a considerably lower cost, making it: an Aftermarket OEM part

So what does this tell you about that Harley Davidson Part that you need?

If you cannot find the quality in an aftermarket part, then search for the OEM provided it is in your price range.

There is a lot of competition out there between vendors who want your dollar. An aftermarket Harley part, for your Harley Davidson are generally of good to excellent quality.

If you own a Harley, sooner or later you will have to buy parts for it. Buying online has its conveniences and you don't have to go downtown and fight traffic.

Keith Nivon is an avid Harley Davidson Motorcycle Enthusiast! His website contains information on all things Harley Davidson. <a target="_new" href="http://www.everything-harley-davidson.com">http://www.everything-harley-davidson.com</a> is a great article resource for anyone who shares a passion for Harley Davidson Motorcycles. Have a look at <a target="_new" href="http://www.everything-harley-davidson.com/harley-davidson-part.html">http://www.everything-harley-davidson.com/harley-davidson-part.html</a> for more info on parts.

Women and Motorcycles? You Bet!

To really understand the women and her ride, one needs to go back in history to explore the courageous women who defied the norm and road their horses in the freedom of the wind. Who could forget Joan of Arc or Annie Oakley. Two completely different women who followed their own council and fought for their right to ride in a man's world. Or the women warlords who fought while on horseback and brandished their swords with the best of them. (and yes, women really did that) What man could resist such a women?

Women's love affair with the motorcycle began with the bicycle back in the 1800's. They became hugely popular with women. Susan B. Anthony once said, &quot;A bicycle has done more for the emancipation of women more than any other thing in this world&quot;.

When the motorized bicycle was developed in the early 1900's, it opened up a whole new realm of adventure for the high-spirited woman of the day. Many women took to the open road not on horseback, but on the iron horse. Adventurous women enjoyed many long distance rides. Some were skilled enough to do stunt riding. No mean feat, especially on the earlier bikes.

The ride for men and women are uniquely different. A man on his ride is master of the iron muscle and his testosterone kicks in while he uses his arms and upper body to control the beast. He is lord and master of his ride. Women take a more subtle approach. They use their lower body and their curves to hug the open road. It's a sensual bond between the bike and the woman. She is also master of the ride but she controls it with more passion and finesse.

There is something about seeing a woman on a motorcycle that makes you take notice. You can see the iron muscle being controlled with femininity. It's the combination of power and aesthetics that make it an irresistible combination.

There is nothing like the open road for both men and women. To experience the freedom and the wind, the sites you see and people you meet along the way that fuel the spirit and feed the soul. This experience is something no one can take from you.

Enjoy!

About the author

Willie Jones <a target="_new" href="http://www.barneysmotorcycles.com">http://www.barneysmotorcycles.com</a>

Willie is a freelance writer, researcher and artist who's adventurous spirit loves to share with others. <a target="_new" href="http://www.barneysmotorcycles.com">Barneys Motorcycle</a>

วันพุธที่ 4 กุมภาพันธ์ พ.ศ. 2552

People Are Crazy... and Everyone Is A Racer

?And everyone is a racer. If you doubt that, you've obviously never driven in New York City during rush hour. Look closely at the driver of that Japanese luxury car. He's just as miffed as you the racer is at having to drive fifty-five miles per hour when the speedometer on the car clearly reads one hundred and fifty. Why can't we drive it at that speed if the car can come close to it. Man, just look at him fiddling with the knobs pretending to be tuning the radio into a station. We racers know what he is really doing is setting the frequency of his imaginary laser beam roadblock remover system. You know the ones; they make little bomb sounds as we pretend we are obliterating our foes on the drive home.

If you really want to annoy him, honk your horn, tailgate him for a few seconds then cut in front of him. When he reaches his boiling point, slam on your brakes and drive slower than you were both going previously. then apply your brakes and drive slower than you were driving before you cut him off. His typical response will be one of anger, an anger borne of the pent-up frustrations of living in a high tech world and being legislated into a low-tech existence. Our driver will invariably stab the gas pedal and swerve out of the lane in an attempt to pass you back. You, in turn, speed up, knowing that his intent is to block pass you at the first opportunity, then brake check you just so you get the message.

And so this high-speed game of "chicken" unfolds on any highway others will graciously move over to let the two road-warriors carry on with the spectacle. I've participated in a more than a few such duels myself though lately I choose to be a bystander to other people's road rage. This emotionally charged ego-tripping could be very dangerous to anyone near the scene.

Society says we should be punished for breaking their law of a maximum velocity of fifty-five miles per hour (in New York at least). Most racers will try to get away with as much as we can, just like on the track and usually have the skills to pull it off. The typical driver lacks all of the needed skills and courage to indulge themselves and so after one or more two hundred dollar speeding tickets, the potential racer's lust for life is usually squashed flatter than Spongebob in the Arizona desert. They usually go home more frustrated, angrier, and two bills poorer. I'm glad I race motorcycles; I'm glad I have a family of people who know and think and feel exactly as I do... we are fortunate to be real racers.

Drivers aren't the only ones who are acting crazy either. Anyone who has walked or driven in Manhattan can attest to the fact that the craziest of all humans is not "Checkered Cabbus-Weavus"; that honor belongs to "Pedestrius Al-sue-yerbutt", the dreaded New York City pedestrian.

No other form of life on the planet is capable of staring into the eyes of the errant tractor-trailer driver and then stepping nonchalantly into the path of his serpentine behemoth. If you've never seen eighteen thousand pounds of truck with all the wheels locked up you don't know what you're missing. The puff of blue smoke in the distance alerts one to the presence of "Pedestrius Al-su-yerbutt."

While the truck driver shakes uncontrollably, trying to bring his heartbeat back below the three hundred mark, "Pedestrius Al-su-yerbutt" flashes an ear to ear grin. And why shouldn't they, they've just looked fear and death in the face and walked away unscathed. Others can only look on in amazement; children will point in their direction with wonder and awe. They are momentarily idolized as they relish fifteen seconds worth of their fifteen minutes of fame. They will be on the tongues of everyone who saw their gutsy moves,

"Holy cripes, did you see that?"

I'm glad I race motorcycles; I'm glad I have a family of people who know and think and feel exactly as I do... we are fortunate to be real racers and have our outlet.

Before we forget that this is a moto-cross story, let me get to the heart of the matter. The point is simply how much we as off road riders and racers have to be grateful for. Unlike the road-rager and "Pedestrius Al-sue-yerbutt," we don't have to drive our cars at one hundred and twenty miles per hour, nor do we have to tempt fate by stepping in front of speeding trucks just to feel that surge of adrenaline. Thank God we are real racers... I do. We aren't as unlucky as the folks who live out the two examples of non-racers.

We are the normal; we can take out our frustrations on machines that were designed to be the healers of our pressures and frustrations. We have moto-cross and the woods to keep us sane. How lucky we are indeed. I'm glad I race motorcycles; I'm glad I have a family of people who know and think and feel exactly as I do... I am fortunate to be among real racers. So when next you are privy to witness any of the afore mentioned dramas, you'll know? people are crazy, and everyone is a racer.

Michael James

*7 years covering professional motocross racing for Cycle News, mxlarge.com, motocross.com, and mxwired.com *amateur motocross racer *screenwriter - seeking representation- *8 year columnist for several motocross papers and magazines

วันอังคารที่ 3 กุมภาพันธ์ พ.ศ. 2552

Mini Moto Tips

These are some quick adjustments and tips for the B1 liquid cooled minimoto that I have found helpful.

Extra heat protection:

To protect the bike I've put some aluminium tape on the inside of the fairing at the closest point to the exhaust and on the underside of the fuel tank. I?ve done this because the engine gets so hot I wanted to protect the fairing from melting, and it doesn't hurt to protect the fuel tank for the same reasons!

My cooling system tips:

When you run out of cooling liquid for your B1 rep, use is distilled water which is available at your local garage, add some food colouring to it so that you can easily tell the level and away you go.

Only fill the reservoir to a quarter full, this is easily enough coolant and it leaves room for the pressure.

Once you have filled the coolant reservoir, there is often air locks in the system. To get rid of these start the bike and allow it to warm up, then bounce the bike (gently) on its back tyre with the bike vertical. Do this a few times, this should get rid of the air locks in the system and prevent overheating. The coolants level may need to be topped up now.

Where not to ride:

Hi just bought my new B1 air cooled from you guys. Thanks it's a great bike. A quick word of advice for your other customers. DO NOT RIDE YOUR MINI MOTO ON THE ROAD. My friend (who also rides a mini moto, but on tracks where they are supposed to be ridden!) is a police man (boooo!) and the law is very strict:

The driver or rider of a motorised board or cycle on a road could face heavy fines, endorsement of licence, disqualification and in the case of dangerous driving, up to 2 years imprisonment.

Remember that the term road includes not only a carriageway but also pavements and verges and also any highway which encompasses footpaths, bridleways and by-ways.

It can also include privately owned roads to which the public have access and has in some cases included car parks?

Car park warriors beware!!!???

Here's a good tip. Before riding your mini moto you will need to make sure that your wheels and chain are aligned. Here's how. Loosen the bolts on the back wheel so that you can move it. Place a piece of perfectly straight wood (I used a meter stick) up against the front wheel. When the front wheel is straight the meter stick should be flush against both the front of the tyre and the back. Then it's a simple case of lining up the back wheel. The chain should now also be straight.

Changing the gearing on your mini moto is simple. A bigger front sprocket combined with a smaller rear sprocket creates a smaller ratio, this means that the mini moto will have better accelelaration but less top spead. A smaller front sprocket with a bigger back sprocket will give your mini moto a better top speed but slower acceleration.

Here are the possible variations of gearing: The lower the ratio the faster acceleration. The higher ratio, the better the top speed.

8/54 6.75>1
8/56 7>1
8/58 7.25>1
8/60 7.5>1
7/54 7.714285714>1
8/62 7.75>1
7/56 8>1
8/64 8>1
7/56 8>1
8/66 8.25>1
7/58 8.285714286>1
8/68 8.5>1
7/60 8.571428571>1
8/70 8.75>1
7/62 8.857142857>1
8/72 9>1
6/54 9>1
7/64 9.142857143>1
8/74 9.25>1
6/56 9.333333333>1
7/66 9.428571429>1
8/76 9.5>1
6/58 9.666666667>1
7/68 9.714285714>1
8/78 9.75>1
6/60 10>1
7/70 10>1
7/72 10.28571429>1
6/62 10.33333333>1
7/74 10.57142857>1
6/64 10.66666667>1
7/76 10.85714286>1
6/66 11>1
7/78 11.14385714>1
6/68 11.33333333>1
6/70 11.66666667>1
6/72 12>1
6/74 12.33333333>1
6/76 12.66666667>1
6/78 13>1

I tried 7/56 with my B1 Rep at GP Karting, I think that this is just about right for that track as it has lotts of tight corners. Might go to Stretton soon so I can try my 7/68 setup. This should be good for the straights however it may take a while to get up to speed!!

Matt Tong has been importing and riding Mini Motos for two years. For expert advice and Mini Moto information please visit <a target="_new" href="http://www.minimotosandmore.com">http://www.minimotosandmore.com</a>

วันจันทร์ที่ 2 กุมภาพันธ์ พ.ศ. 2552

Motorcycle Radar Detectors

Standard radar detectors were not built for motorcycles and were never intended to be used on them. Most detectors use an audio device to inform the driver that radar had been detected, and are therefore inappropriate for motorcycle riders because they cannot be heard. Furthermore, most have long cords and poor mounting options, not to mention the fact that they are not weatherproof. As both motorcycles and radar detectors have become more popular, however, the demand for motorcycle radar detectors has increased dramatically.

Manufacturers now produce cordless detectors with an earphone jack so that the rider can hear alerts. For instance, BEL has released a model specifically for motorcycles, while Escort and Whistler make models with earphone jacks.

Important considerations when shopping for radar include band detection, distance of detection, ability to send a jamming signal, and, of course, price. In addition to these concerns, anyone interested in purchasing a motorcycle radar detector should keep the following in mind: Does the detector come with an ear jack? Is it weatherproof, or can it be enclosed in a weatherproof container? Is the detector mountable?

The Escort Passport 8500 X50 is popular for motorcycle riders. In addition to an ear phone jack, this model is highly sensitive to X-band, K-band and Ka-band radars. When set in its ""ExpertMeter"" mode, this model allows the rider to see up to eight radar signals, as well as their individual bands and strengths, simultaneously. In addition, the display brightness settings include a ""dark mode"" for stealth use. One method of installation for this model is to tie the 8500 into the rider's helmet speakers using a common universal stereo mini-plug patch cord. The unit can be mounted with suction cups to the windshield.

Although the niche for motorcycle radar detectors continues to grow, most models will still lack in at least one area. Thankfully, most detector retailers sell attachments that allow cordless models to be converted for use with motorcycles.

<a target="_new" href="http://www.e-radardetectors.com">Radar Detectors Info</a> provides comprehensive information on best wholesale and retail motorcycle and cordless radar detectors. Radar Detectors Info is the sister site of <a target="_new" href="http://www.e-defensivedriving.com">Defensive Driving Web</a>.

วันอาทิตย์ที่ 1 กุมภาพันธ์ พ.ศ. 2552

People Are Crazy... and Everyone Is A Racer

?And everyone is a racer. If you doubt that, you've obviously never driven in New York City during rush hour. Look closely at the driver of that Japanese luxury car. He's just as miffed as you the racer is at having to drive fifty-five miles per hour when the speedometer on the car clearly reads one hundred and fifty. Why can't we drive it at that speed if the car can come close to it. Man, just look at him fiddling with the knobs pretending to be tuning the radio into a station. We racers know what he is really doing is setting the frequency of his imaginary laser beam roadblock remover system. You know the ones; they make little bomb sounds as we pretend we are obliterating our foes on the drive home.

If you really want to annoy him, honk your horn, tailgate him for a few seconds then cut in front of him. When he reaches his boiling point, slam on your brakes and drive slower than you were both going previously. then apply your brakes and drive slower than you were driving before you cut him off. His typical response will be one of anger, an anger borne of the pent-up frustrations of living in a high tech world and being legislated into a low-tech existence. Our driver will invariably stab the gas pedal and swerve out of the lane in an attempt to pass you back. You, in turn, speed up, knowing that his intent is to block pass you at the first opportunity, then brake check you just so you get the message.

And so this high-speed game of "chicken" unfolds on any highway others will graciously move over to let the two road-warriors carry on with the spectacle. I've participated in a more than a few such duels myself though lately I choose to be a bystander to other people's road rage. This emotionally charged ego-tripping could be very dangerous to anyone near the scene.

Society says we should be punished for breaking their law of a maximum velocity of fifty-five miles per hour (in New York at least). Most racers will try to get away with as much as we can, just like on the track and usually have the skills to pull it off. The typical driver lacks all of the needed skills and courage to indulge themselves and so after one or more two hundred dollar speeding tickets, the potential racer's lust for life is usually squashed flatter than Spongebob in the Arizona desert. They usually go home more frustrated, angrier, and two bills poorer. I'm glad I race motorcycles; I'm glad I have a family of people who know and think and feel exactly as I do... we are fortunate to be real racers.

Drivers aren't the only ones who are acting crazy either. Anyone who has walked or driven in Manhattan can attest to the fact that the craziest of all humans is not "Checkered Cabbus-Weavus"; that honor belongs to "Pedestrius Al-sue-yerbutt", the dreaded New York City pedestrian.

No other form of life on the planet is capable of staring into the eyes of the errant tractor-trailer driver and then stepping nonchalantly into the path of his serpentine behemoth. If you've never seen eighteen thousand pounds of truck with all the wheels locked up you don't know what you're missing. The puff of blue smoke in the distance alerts one to the presence of "Pedestrius Al-su-yerbutt."

While the truck driver shakes uncontrollably, trying to bring his heartbeat back below the three hundred mark, "Pedestrius Al-su-yerbutt" flashes an ear to ear grin. And why shouldn't they, they've just looked fear and death in the face and walked away unscathed. Others can only look on in amazement; children will point in their direction with wonder and awe. They are momentarily idolized as they relish fifteen seconds worth of their fifteen minutes of fame. They will be on the tongues of everyone who saw their gutsy moves,

"Holy cripes, did you see that?"

I'm glad I race motorcycles; I'm glad I have a family of people who know and think and feel exactly as I do... we are fortunate to be real racers and have our outlet.

Before we forget that this is a moto-cross story, let me get to the heart of the matter. The point is simply how much we as off road riders and racers have to be grateful for. Unlike the road-rager and "Pedestrius Al-sue-yerbutt," we don't have to drive our cars at one hundred and twenty miles per hour, nor do we have to tempt fate by stepping in front of speeding trucks just to feel that surge of adrenaline. Thank God we are real racers... I do. We aren't as unlucky as the folks who live out the two examples of non-racers.

We are the normal; we can take out our frustrations on machines that were designed to be the healers of our pressures and frustrations. We have moto-cross and the woods to keep us sane. How lucky we are indeed. I'm glad I race motorcycles; I'm glad I have a family of people who know and think and feel exactly as I do... I am fortunate to be among real racers. So when next you are privy to witness any of the afore mentioned dramas, you'll know? people are crazy, and everyone is a racer.

Michael James

*7 years covering professional motocross racing for Cycle News, mxlarge.com, motocross.com, and mxwired.com *amateur motocross racer *screenwriter - seeking representation- *8 year columnist for several motocross papers and magazines

A Convenient Way to Slash Your Gas Bill

&quot;With oil prices spiraling higher almost every day, people are starting to look for alternative modes of transport,&quot; says Michael S. Milstead of Scootertronics. &quot;With scooters, commuters can slash their gas bills and still have an efficient, reliable mode of transport."

With the introduction of four stroke scooters into the market this year even larger savings can be had with these scooters getting 60 to 80 miles per gallon. Four Stroke Scooters are much easier to care for than two stroke scooters with oil added to an oil reserveb just like a car instead of being injected into carb for lubrication. This keeps the carb from getting clooged up plus eliminates the expense of two stroke oil and reduces smoke plus you get a quieter smoother running engine.

The larger 150cc scooters are also making a splach adding the power and speed to to keep up with fast moving traffic. Although150cc scooters are treated like motorcycles where you need a motorcyle license the 49.5cc scooters in most only require a regualr drivers license and no tags in most states.

So if you are looking to slash your gas bills consider a four stroke gas scooter to make your commute not only enjoyable but money saving also.

As the owner and sales rep for <a target="_new" href="http://www.scootertronics.com">www.scootertronics.com</a> Michael Milstead has been providing info and scooters to the public for all kinds of transportation that will give them great savings on thier gas bill each month paying for the scooter in a very short period of time.

Motorcycle Parts - OEM or Aftermarket ?

This is always a difficult one to answer when shopping for motorcycle parts and I firmly believe that each one of us must decide what's best for our bikes AFTER carefully evaluating each of the possibilities.

For me?

Well... it really depends on what I am looking for - just replacement or improvement - , the availability of the part, my budget and other things. Sometimes I buy OEM, others aftermarket motorcycle parts.

Keep reading. You will find some views that will hopefully help you decide the next time you shop for motorcycle parts.

What a heck are OEM parts??

OEM parts stands for Original Equipment Manufacturer parts which not necessarily mean the OM (Original Manufacturer) actually produced them. You know, many motorcycle and automobile manufacturers don't manufacture each of the parts used in their vehicles. They frequently have the parts designed and manufactured by outside independent companies and then, install them in their machines or put them in their own boxes to be sold as OEM parts!

Good to know when buying OEM Motorcycle Parts:

When you buy OEM Motorcycle Parts you are buying the exact same original part the manufacturer used to build your motorcycle, that means:

>> Same performance as the part installed in your motorcycle right now. The part won't be better nor worse than the original part you want to replace.

>> Normally OEM parts a more (in some cases MUCH more) expensive than aftermarket parts.

>> Motorcycle and car agencies clerks will normally tell you OEM Parts are higher quality and the best option for replacements. Is this true? Well sometimes it is, sometimes it's not.

>> Normally after a certain period of time, the manufacturer will allow the company that originally designed/produced the part to sell it in their own box at a considerably lower cost, making it: an Aftermarket OEM part! :-)

>> BE CAREFUL if your bike is still in its guarantee period make sure you use only OEM parts and have them installed by authorized mechanics. If you don't do so, you will probably void the guarantee.

What about Aftermarket parts??

Aftermarket parts should perform as well as OEM parts but are produced by companies other than the original manufacturer(s).

Things to know when buying Aftermarket Motorcycle Parts:

>> MAKE SURE YOUR GUARANTEE PERIOD IS OVER. In many cases, you can VOID your guarantee if you have an aftermarket part installed by an unauthorized mechanic in your machine. I know I said it before, but it's worth repeating; I happened to me! :-(

>> Equivalent aftermarket Suzuki motorcycle parts are normally cheaper than OEM parts. Sometimes up to 70% cheaper!

>> Aftermarket parts can have lower,the same or higher quality than the original.

>> When buying aftermarket parts make sure you are getting AT LEAST the same quality as the OEM part. If possible try to get some reviews about brands and performance. You can do it in the Internet, with your favorite mechanic or with fellow riders.

>> If you are looking for high performance parts and devices, you know the kind: carbon fiber, titanium, aerospace aluminum parts and gizmos, well you will probably find them as aftermarket motorcycle parts.

OEM or aftermarket motorcycle parts, sooner or later you will be shopping for them...

Enjoy the ride!

Daniel Levy

Daniel Levy is the owner and contributing writer of <a target="_new" href="http://www.Japanese-Motorcycles-Only.com">http://www.Japanese-Motorcycles-Only.com</a> . He loves motorcycles and Web development. For more great info visit <a target="_new" href="http://www.japanese-motorcycles-only.com/">http://www.japanese-motorcycles-only.com/</a>

If you need motorcycle parts, check out BikeBandit: my favorite online store for motorcycle parts. You will find a full review of their business in this page:<a target="_new" href="http://www.japanese-motorcycles-only.com/bike-bandit.html">http://www.japanese-motorcycles-only.com/bike-bandit.html</a>

Women and Motorcycles? You Bet!

To really understand the women and her ride, one needs to go back in history to explore the courageous women who defied the norm and road their horses in the freedom of the wind. Who could forget Joan of Arc or Annie Oakley. Two completely different women who followed their own council and fought for their right to ride in a man's world. Or the women warlords who fought while on horseback and brandished their swords with the best of them. (and yes, women really did that) What man could resist such a women?

Women's love affair with the motorcycle began with the bicycle back in the 1800's. They became hugely popular with women. Susan B. Anthony once said, &quot;A bicycle has done more for the emancipation of women more than any other thing in this world&quot;.

When the motorized bicycle was developed in the early 1900's, it opened up a whole new realm of adventure for the high-spirited woman of the day. Many women took to the open road not on horseback, but on the iron horse. Adventurous women enjoyed many long distance rides. Some were skilled enough to do stunt riding. No mean feat, especially on the earlier bikes.

The ride for men and women are uniquely different. A man on his ride is master of the iron muscle and his testosterone kicks in while he uses his arms and upper body to control the beast. He is lord and master of his ride. Women take a more subtle approach. They use their lower body and their curves to hug the open road. It's a sensual bond between the bike and the woman. She is also master of the ride but she controls it with more passion and finesse.

There is something about seeing a woman on a motorcycle that makes you take notice. You can see the iron muscle being controlled with femininity. It's the combination of power and aesthetics that make it an irresistible combination.

There is nothing like the open road for both men and women. To experience the freedom and the wind, the sites you see and people you meet along the way that fuel the spirit and feed the soul. This experience is something no one can take from you.

Enjoy!

About the author

Willie Jones <a target="_new" href="http://www.barneysmotorcycles.com">http://www.barneysmotorcycles.com</a>

Willie is a freelance writer, researcher and artist who's adventurous spirit loves to share with others. <a target="_new" href="http://www.barneysmotorcycles.com">Barneys Motorcycle</a>

วันเสาร์ที่ 31 มกราคม พ.ศ. 2552

People Are Crazy... and Everyone Is A Racer

?And everyone is a racer. If you doubt that, you've obviously never driven in New York City during rush hour. Look closely at the driver of that Japanese luxury car. He's just as miffed as you the racer is at having to drive fifty-five miles per hour when the speedometer on the car clearly reads one hundred and fifty. Why can't we drive it at that speed if the car can come close to it. Man, just look at him fiddling with the knobs pretending to be tuning the radio into a station. We racers know what he is really doing is setting the frequency of his imaginary laser beam roadblock remover system. You know the ones; they make little bomb sounds as we pretend we are obliterating our foes on the drive home.

If you really want to annoy him, honk your horn, tailgate him for a few seconds then cut in front of him. When he reaches his boiling point, slam on your brakes and drive slower than you were both going previously. then apply your brakes and drive slower than you were driving before you cut him off. His typical response will be one of anger, an anger borne of the pent-up frustrations of living in a high tech world and being legislated into a low-tech existence. Our driver will invariably stab the gas pedal and swerve out of the lane in an attempt to pass you back. You, in turn, speed up, knowing that his intent is to block pass you at the first opportunity, then brake check you just so you get the message.

And so this high-speed game of "chicken" unfolds on any highway others will graciously move over to let the two road-warriors carry on with the spectacle. I've participated in a more than a few such duels myself though lately I choose to be a bystander to other people's road rage. This emotionally charged ego-tripping could be very dangerous to anyone near the scene.

Society says we should be punished for breaking their law of a maximum velocity of fifty-five miles per hour (in New York at least). Most racers will try to get away with as much as we can, just like on the track and usually have the skills to pull it off. The typical driver lacks all of the needed skills and courage to indulge themselves and so after one or more two hundred dollar speeding tickets, the potential racer's lust for life is usually squashed flatter than Spongebob in the Arizona desert. They usually go home more frustrated, angrier, and two bills poorer. I'm glad I race motorcycles; I'm glad I have a family of people who know and think and feel exactly as I do... we are fortunate to be real racers.

Drivers aren't the only ones who are acting crazy either. Anyone who has walked or driven in Manhattan can attest to the fact that the craziest of all humans is not "Checkered Cabbus-Weavus"; that honor belongs to "Pedestrius Al-sue-yerbutt", the dreaded New York City pedestrian.

No other form of life on the planet is capable of staring into the eyes of the errant tractor-trailer driver and then stepping nonchalantly into the path of his serpentine behemoth. If you've never seen eighteen thousand pounds of truck with all the wheels locked up you don't know what you're missing. The puff of blue smoke in the distance alerts one to the presence of "Pedestrius Al-su-yerbutt."

While the truck driver shakes uncontrollably, trying to bring his heartbeat back below the three hundred mark, "Pedestrius Al-su-yerbutt" flashes an ear to ear grin. And why shouldn't they, they've just looked fear and death in the face and walked away unscathed. Others can only look on in amazement; children will point in their direction with wonder and awe. They are momentarily idolized as they relish fifteen seconds worth of their fifteen minutes of fame. They will be on the tongues of everyone who saw their gutsy moves,

"Holy cripes, did you see that?"

I'm glad I race motorcycles; I'm glad I have a family of people who know and think and feel exactly as I do... we are fortunate to be real racers and have our outlet.

Before we forget that this is a moto-cross story, let me get to the heart of the matter. The point is simply how much we as off road riders and racers have to be grateful for. Unlike the road-rager and "Pedestrius Al-sue-yerbutt," we don't have to drive our cars at one hundred and twenty miles per hour, nor do we have to tempt fate by stepping in front of speeding trucks just to feel that surge of adrenaline. Thank God we are real racers... I do. We aren't as unlucky as the folks who live out the two examples of non-racers.

We are the normal; we can take out our frustrations on machines that were designed to be the healers of our pressures and frustrations. We have moto-cross and the woods to keep us sane. How lucky we are indeed. I'm glad I race motorcycles; I'm glad I have a family of people who know and think and feel exactly as I do... I am fortunate to be among real racers. So when next you are privy to witness any of the afore mentioned dramas, you'll know? people are crazy, and everyone is a racer.

Michael James

*7 years covering professional motocross racing for Cycle News, mxlarge.com, motocross.com, and mxwired.com *amateur motocross racer *screenwriter - seeking representation- *8 year columnist for several motocross papers and magazines

Motorcycle Suspension: - A Troubleshooting Guide

Trouble Shooting Suspension Problems.

Adjustment locations: Forks

Rebound adjustment (if applicable) is located near the top of the fork. Compression adjustment (if applicable) is located near the bottom of the fork. Spring preload adjustment (if applicable) is generally hex style and located at the top of the fork.

Lack of Rebound

Symptoms:

? Forks are plush, but increasing speed causes loss of control and traction

? The motorcycle wallows and tends to run wide exiting the turn causing fading traction and loss of control.

? When taking a corner a speed, you experience front-end chatter, loss of traction and control.

? Aggressive input at speed lessons control and chassis attitude suffers.

? Front end fails to recover after aggressive input over bumpy surfaces.

Solution: Insufficient rebound. Increase rebound "gradually" until control and traction are optimized and chatter is gone.

Too Much Rebound

Symptoms:

? Front end feels locked up resulting in harsh ride.

? Suspension tucks in and fails to return, giving a harsh ride. Typically after the first bump, the bike will skip over subsequent bumps and want to tuck the front.

? With acceleration, the front end will tank slap or shake violently due to lack of front wheel tire contact.

Solution: Too much rebound. Decrease rebound "gradually" until control and traction are optimized.

Lack of Compression

Symptoms:

? Front-end dives severely, sometimes bottoming out over heavy bumps or during aggressive breaking.

? Front feels soft or vague similar to lack of rebound.

? When bottoming, a clunk is heard. This is due to reaching the bottom of fork travel.

Solution: Insufficient compression. Increase "gradually" until control and traction are optimized.

Too Much Compression

Symptom:

? Front end rides high through the corners, causing the bike to steer wide. It should maintain the pre-determined sag, which will allow the steering geometry to remain constant.

Solution: Decrease compression "gradually" until bike neither bottoms nor rides high.

Symptom:

? Front end chatters or shakes entering turns. This is due to incorrect oil height and/or too much low speed compression damping.

Solution: First, verify that oil height is correct. If correct, then decrease compression "gradually" until chattering and shaking ceases.

Symptom:

? Bumps and ripples are felt directly in the triple clamps and through the chassis. This causes the front wheel to bounce over bumps.

Solution: Decrease compression "gradually" until control is regained.

Symptom:

? Ride is generally hard, and gets even harder when braking or entering turns.

Solution: Decrease compression "gradually" until control is regained.

Adjustment Locations: Rear Shock

Rebound adjustment (if applicable) is located at the bottom of the shock. Compression adjustment (if applicable) is located on the reservoir. Spring prelude is located at the top of the shock.

Shock: Lack of Rebound

Symptoms:

? The ride will feel soft or vague and as speed increases, the rear end will want to wallow and/or weave over bumpy surfaces and traction suffers.

? Loss of traction will cause rear end to pogo or chatter due to shock returning too fast on exiting a corner.

Solution: Insufficient rebound - Increase rebound until wallowing and weaving disappears and control and traction are optimized.

Shock: Too Much Rebound

Symptoms:

? Ride is harsh, suspension control is limited and traction is lost.

? Rear end will pack in, forcing the bike wide in corners, due to rear squat. It will slow steering because front end is riding high.

? When rear end packs in, tires generally will overheat and will skip over bumps.

? When chopping throttle, rear end will tend to skip or hop on entries.

Solution: Too much rebound. Decrease rebound "gradually" until harsh ride is gone and traction is regained. Decrease rebound to keep rear end from packing.

Shock: Lack of Compression

Symptoms:

? The bike will not turn in entering a turn.

? With bottoming, control and traction are lost.

? With excessive rear end squat, when accelerating out of corners, the bike will tend to steer wide.

Solution: Insufficient compression. Increase compression "gradually until traction and control is optimized and/or excessive rear end squat is gone.

Shock: Too Much Compression

Symptoms:

? Ride is harsh, but not as bad as too much rebound. As speed increases, so does harshness.

? There is very little rear end squat. This will cause loss of traction/sliding. Tire will overheat.

? Rear end will want to kick when going over medium to large bumps.

Solution: Decrease compression until harshness is gone. Decrease compression until sliding stops and traction is regained.

Mark Thompson has spent the past 20 years racing motorcycles and managing Race teams and riders. He now runs the <a target="_new" href="http://www.trackbikes.co.uk">Trackbikes</a> Website along with a number on Internet Ventures

วันศุกร์ที่ 30 มกราคม พ.ศ. 2552

It?s One Thing for People to Buy Your Product or Service, but It?s Another for Them to Tattoo Your

William Harley and Arthur Davidson, both in their early twenties, built their first motorcycle in 1903. During their first year, the company's entire output was only 1 motorbike; however, by 1910, the company had sold 3,200. Movies such as Easy Rider made Harleys a cultural icon and soon the company attracted people who loved its bad-boy mystique, powerfulness, rumbling voice, distinctive roar, and toughness. It sounded like nothing else on the road, and even Elvis Presley and Steve McQueen longed to ride one.

The Harley-Davidson Motor Company has had its ups and downs, and at times, the downs seemed as if they would end in bankruptcy. In the sixties, Honda, Kawasaki, and Yamaha invaded the American market, and when sales at Harley-Davidson dropped drastically due to decreasing quality and increasing competition, the company began to look for buyers and was finally sold. However, the new owners of Harley Davidson knew little about how to restore profitability. The quality became so bad that dealers had to place cardboard under bikes in the showroom to absorb the oil leaking.

Daniel Gross, in Forbes Greatest Business Stories of all Times, recounts how in 1981, with the aid of Citibank, a team of former Harley-Davidson executives began negotiations to reacquire the company and rescue it from bankruptcy. Among these executives was William Davidson, the grandson of the founder Arthur Davidson. In a classic leveraged buyout, they pooled $1 million in equity and borrowed $80 million from a consortium of banks lead by Citibank.

Harley's rescue team of loyal executives knew that the Japanese motorbike manufacturers were far ahead in regard to quality management, and they made a bold decision to tour a nearby Honda plant. Paradoxically, the Japanese had learned Total Quality Management from the Americans, Edwards Deming and Joseph Juran. The new business concept outlined by these two pioneers was a new management approach that, interestingly enough, had been rejected by American manufacturers. As a result, they offered this approach to Japanese manufactures that were eager to learn and implement it. Therefore, soon after their tour of the Honda plant, the Harley Davidson Motor Company decided to put into practice this originally rejected approach.

After implementing just-in-time inventory (JIT) and employee involvement, costs at Harley had dropped significantly; this meant that the company only needed to sell 35,000 bikes instead of 53,000 in order to break even. Their lobbying at Washington also helped, and import tariffs were raised temporarily from 4 to 40 percent on Japanese bikes. This extra breathing space was something that the U.S. motorbike company desperately needed for its recovery.

The combination of visiting a Japanese motorbike manufacturing plant and lobbying in Washington for import tariffs was a daring move on behalf of Harley's executives in their attempt to bring back profitability and growth to the company. Another important strategic move was the company's unique marketing and branding campaigns. Studies showed that about 75 % of Harley customers made repeat purchases, and executives quickly recognized a pattern that refocused the company's overall strategy. Simply put, they needed to find a way to appeal to the extraordinary loyalty of customers, which they found in creating a community that valued the experience of riding a Harley more than the product itself.

The sponsorship of a &quot;Harley Owners' Group&quot; has been one of the most creative and innovative strategies that has helped create the experience of this product. Without realizing it, Harley executives had pioneered a new paradigm that would be increasingly embraced by other industries in their quest to increase profitability by converting their product into an experience. The company started to organize rallies to strengthen the relationship between its members, dealers, and employees, while also promoting the Harley experience to potential customers. The Harley Owners' Groups became immensely popular; it allowed motorcycle owners to feel as if they belonged to one big family. In 1987, there were 73,000 registered members, and Harley now boasts to have no less than 450,000 members.

In 1983, the company launched a marketing campaign called SuperRide, which authorized over 600 dealerships to invite people to test-drive Harleys. Over 40,000 potential new customers accepted the invitation, and from then on, many customers were not just buying a motorcycle when they bought a Harley; instead, they were buying &quot;the Harley Experience.&quot;

Harley-Davidson offered its customers a free one-year membership to a local riding group, motorcycle publications, private receptions at motorcycle events, insurance, emergency roadside service, rental arrangements on vacation, and a host of other member benefits. Branding the experience, not just the product, has allowed the company to expand how it captures value, including a line of clothing, a parts and accessories business, and Harley-Davidson Visa card.

If you were to scan the list of companies that delivered the greatest returns on investment during the 1990s, you would discover Harley-Davidson. Only a few companies have been successful in inventing entirely new business models, or profoundly reinventing existing ones. Harley-Davidson went from supplying motorcycles to antisocial raiders to selling a lifestyle to the aging bad boy wannabes caught in their midlife crises. Traditionally, Harley-Davidson bike owners came from the working and middle classes, but as quality and prices of the bad-boy-bikes rose, and with energetic marketing, the company soon attracted a different class of buyers-currently one third of Harley buyers are professionals or managers, and 60% are college graduates. The new customer segments of Harley are the Rolex Riders or the Rich Urban Bikers. Hell's Angels do not run in the same group anymore. Now there are groups of accountants, lawyers and doctors. Women also account for a significant portion of the new riders, and there are women-only riders clubs spreading all over the globe.

The future looks bright for the U.S. motorbike company. According to The Economist, overall U.S. sales increased over 20% in 2000, and more than 650,000 new motorcycles were sold in the U.S. in the same year, up from 539,000 the year before. Bike buyers spent an estimated $5.45 billion on new bikes in 2000.

Stay alert and get it early. The new branding paradigm is to sell a lifestyle, a personality and it is also about appealing to emotions of your customers. Increasingly, it will be more and more about creating an experience around the product. Brand managers and executives will need a new set of lenses. The rules have changed as well as the opportunities to maximize profitability and create value in the process. Nonetheless, the majority of companies continue to follow traditional ad campaigns and they seem to ignore the fact that the media has fragmented into hundreds of cable channels, thousands of magazine titles and millions of Internet pages.

Consumers are no longer sitting ducks for commercials; they are looking for new experiences. Whether it is the bad-boy-aura of the Harley riding experience, the exquisite coffee experience in Starbucks caf?s, or the active participation in Net communities, more and more companies will need to follow these early new branding pioneers. They will need to look into the dynamics of their relationships with customers and the nature of their interaction. They will need to ask themselves some serious &quot;out-of-the-box&quot; questions if they want to move with the shifting value that is the result of constantly changing market conditions.

Branding has changed and so have marketing and advertising campaigns. New variability, heterogeneity where there was once homogeneity, newly emerging stratifications of wealth, new preferences, and new life styles are all characteristics of the 21st century customer that are here to stay. We better get used to it, at lease until the next paradigm is discovered. Remember, the companies that are creating new wealth are not just getting better; they are becoming different-mind-bogglingly different!

Bibliography:
Barker, Joel. Paradigms. Harper Business, 1993.

Bedbury, Scott. A New Brand World: Eight Principles for Achieving Brand Leadership in the 21st Century, Viking Press, 2002.

Gross, Daniel: Forbes Greatest Business Stories of All Time, John Wiley & Sons, 1997.

Hamel, Gary. &quot;Innovation Now,&quot; in Fast Company (http://www.fastcompany.com/online/65/innovation.html), December 2002

Kotter, John P., Leading Change, Harvard Business School Press, 1996, pp. 4 ? 14.

Teerlink, Rich, and Ozley, Lee: More Than a Motorcycle: The Leadership Journey at Harley-Davidson, Harvard Business School Press, 2000. Young, James Webb. Technique for Producing Ideas, McGraw-Hill, p. 14.

Josef Schinwald is consultant in Performance Measurement and professor in Business Strategy at the University of Belgrano, Buenos Aires, Argentina, and his didactic material must not be replicated without the given permission to do so. Copyright ? 2003-2005 Business Design Innovation. Josef is also owner of ValueQuest, LLC, a e-commerce business, and you can visit his sites at My Motorcycle Leather <a target="_new" href="http://www.my-motorcycle-leather.com">http://www.my-motorcycle-leather.com</a> and Stylish Wedding Favors <a target="_new" href="http://www.stylish-wedding-favors.com">http://www.stylish-wedding-favors.com</a>.

Auctions and Car Transport: Everything You Need To Know

Everyone has wanted to sell a car at some point and in the age of Internet auctions, there are more options than ever when it comes to selling your car whether it's an '05, '78 or a '20. With this ever expanding world of options comes the need to make delivery after you've sold the vehicle and that requires a car transport service.

Depending on the auction service, you can list that shipment of the item is completely up to the buyer's discretion or offer a method of transportation to fold into the final price.

The first is often more preferable to buyers because it allows them to shop various car transporters themselves to find the one that suits them best. However, if you decide to fold the cost of the shipment along with a hand picked transporter into the auction of your car, there are some things you need to do.

First, you need to narrow down your selection of transporters in some fashion that incorporates not only their price ranges but also their reliability and service records. Remember, that by folding in the selection of the transporter to the auction, you are in some way taking responsibility for the shipment both before you deliver it to the transporter and after.

Second, to simplify the matters with regard to the auction, make sure you have all the information about your selected transporter at hand. Include this information in the auction information. When buyers look through potential cars to buy on auctions they are as concerned about the cars they are looking at as to how they might get there.

Some buyers may not want to use the transporter you have selected; you may or may not wish to include that as an option to turn down on the buyer's part.

Finally, when you are ready to list the car as well as the transporter information, be sure to include a series of price quotes from the transporter from the car's location to major hubs on both coasts, the mid-west and include both upper and lower sides of the coasts, mid-Atlantic and so on.

This will allow the buyer to guess based on their proximity to one of those locations what the cost will likely be. Always be sure to list that the quotes are not exact and are not final until the buyer's shipping information is received.

It may seem like more work than it's worth to go through all of this prior to listing the car that you want to sell, it will pay off at the auction's closing. As the seller, you simply wait to confirm where the car is being transported to and confirm a final quote from the transportation company.

Once the seller receives the payment from the buyer they can get the car to the transportation company of their choice and not have to worry if the buyer chooses a transporter that will be a hassle for you the seller.

While most buyers and sellers work in fairly cooperative relations in order to receive the item sold and the payment for the item, sometimes having the game plan set will save a lot of time.

Discover vital information and advice about car and auto transport services. Find out what you must do, and what you must not do. Click <a target="_new" href="http://www.auto-transport-101.com/">http://www.auto-transport-101.com/</a>

วันพุธที่ 28 มกราคม พ.ศ. 2552

Do You Need a Part for Your Harley Davidson Motorcycle?

Need a Harley Davidson Part for your ride?

<B>Where do you get a good quality Harley Davidson Part? Can I use an aftermarket part?

These questions are not easy to answer. It depends a lot on your situation, part you're looking for, and the money you want to spend.

The bottom line......... you have to decide.

I have a little information here that may be useful to you, so keep reading!

<B>An OEM part versus an aftermarket part.

An <B>OEM (Original Equipment Manufacturer) part are of course the genuine Harley Davidson Part you would find at an authorized Harley dealer.

These parts are original in that they have the exact same specifications that came with the original part.

These parts however many not have been manufactured by Harley Davidson themselves (at their physical location). Harley may get another company to manufacture these parts to Harley specs, and then they will sell them in the Harley box as OEM.

OEM parts are generally more expensive, and almost always recommended by the dealer. (They make their money by selling parts not bikes)

The dealer will most likely tell you that OEM parts are of a higher quality. This may or may not be true.

An <B>Aftermarket part should perform as well as an OEM but take note. These parts were made by a company other than the original manufacturer.

Sometimes after a certain time period the original manufacturer of a part will allow the company that physically manufactured the part to sell it at a reduced price and in their own packaging. The part now becomes an OEM aftermarket part.

Normally after a certain period of time, the manufacturer will allow the company that originally designed/produced the part to sell it in their own box at a considerably lower cost, making it: an Aftermarket OEM part

So what does this tell you about that Harley Davidson Part that you need?

If you cannot find the quality in an aftermarket part, then search for the OEM provided it is in your price range.

There is a lot of competition out there between vendors who want your dollar. An aftermarket Harley part, for your Harley Davidson are generally of good to excellent quality.

If you own a Harley, sooner or later you will have to buy parts for it. Buying online has its conveniences and you don't have to go downtown and fight traffic.

Keith Nivon is an avid Harley Davidson Motorcycle Enthusiast! His website contains information on all things Harley Davidson. <a target="_new" href="http://www.everything-harley-davidson.com">http://www.everything-harley-davidson.com</a> is a great article resource for anyone who shares a passion for Harley Davidson Motorcycles. Have a look at <a target="_new" href="http://www.everything-harley-davidson.com/harley-davidson-part.html">http://www.everything-harley-davidson.com/harley-davidson-part.html</a> for more info on parts.

Avoiding Excessive or Uneven Front Tire Wear

All rubber tires wear down over time, whether they're on a motorcycle or automobile. However, you want to watch out for uneven or excessive wear, both of which can cause serious problems for motorcycle riders. If you pay attention to the following causes of excessive and uneven wear, you will extend the life of your tires and keep yourself safe:

1. Improper Tire Pressure - We have all heard about the importance of maintaining proper tire pressure at all times. Improper air pressure in your tire is a big reason for many tire problems and failures. Be sure your tires have the recommended pressure in them at all times.

2. Humped Roads -- Most roads are "humped" slightly in the middle or banked away from the center to allow rain and water to drain off. However, this hump can have a dramatic effect on one side of your motorcycle's front tire because the side of the tire closer to the center of the road will wear faster. There's not much you can do about this, and it can become very visible if you ride a lot. So be aware of this phenomenon and check the left side of your front tire often.

3. Disproportionate Cupping -- Cupping is a normal phenomenon on rubber tires that occurs when the brakes are applied. However, excessive use of the front brake can produce disproportionate cupping, when one side of the tire is more cupped than the other. Using the front brake will naturally put more pressure and force on the front tire to make it stop, thereby using up more rubber.

4. Wheel Alignment - While this problem is not as common on motorcycles as it is on cars, it causes uneven tire wear. Any number of things can cause wheel misalignment on motorcycles, including getting into a fender bender, riding over potholes, jumping over sidewalks and curbs, etc. It is a good idea to have your wheel alignment checked out at least once a year to make sure that a misalignment isn't unevenly wearing your front tire.

5. Shock Absorbers -- A bad shock absorber can wreak havoc on the handling of your bike and promotes uneven front tire wear. So make sure your shocks are in good shape.

6. Improper Loading -- The final major problem to keep in mind is improper loading of your bike, which causes your front tire to wear unevenly. Proper weight distribution is essential to being able to handle and steer your bike safely. Loading down one side of your saddlebag with tools or equipment can keep you from riding as vertically as possible, creating uneven tire wear.

So check your tires frequently, and keep these causes in mind if you begin noticing excessive or uneven front tire wear. Having the knowledge and taking the proper precautions will not only make you a safer rider but will prolong the life of your bike's tires.

Jeff Sinason aka Tools - is the owner <a target="_new" href="http://www.bikerwares.com">Bikerwares.com</a>. Being an avid biker, he spends most of his time working on his web site and touring the country.

Welcome To The World Of ?Upside Down? Motorcycle Loans!

With the depreciation on motorcycles being so enormous after they are driven off the showroom floor, the potential for a buyer owing more on their motorcycle loan than the bike is worth it quite high. Owing more on your bike than it is worth is often referred to as the world of &quot;up side down&quot;.

Many people finding themselves in this situation discover that financial lessons are sometimes the hardest and most expensive to learn. Motorcycle loans of more than 48 months (especially without a down payment) put you in the position of owing more than the value of the bike.

Let's take a look at this phenomenon.

First, the interest calculation your lender uses can make a big difference in your situation, especially in the first 18 months. There are two primary interest calculations, pre-computed (combined with rule of 78) and simple interest.

Pre-computed interest combined with Rule of 78, is typically the worst situation for a buyer because most of the interest is paid in the first 24 months. Therefore, in the first 24 months little of the monthly payment has gone towards paying down principal. If a buyer wishes to sell or trade in the motorcycle within this timeframe they will likely find themselves owing more than the bike is worth. Statistics show that the average owner trades in every 18-24 months.

Simple interest on the other hand, is much more favorable for buyers since interest accrues on the balance of the loan. However, buyers that extend their loans for greater than 48 months can still find themselves up side down with simple interest. This is especially true if a down payment is not made. The reason this occurs is that the motorcycle depreciates faster than the principal is paid; leaving the balance owed to the lender to be more than the bike can be sold for.

A common view that many people have is that they will just surrender their motorcycle to the lender if they are caught in an &quot;up side down&quot; position. If you are considering this option don't! Your worries do not just end after your bike is surrendered or repossessed; in fact they are just beginning. The lender will sell your bike at an auction for much less than it is worth. You will still owe the difference between the amount you owed on your loan and the amount the motorcycle sold for at auction. So if you owe $5000 and the bike sells for $1500, you still are responsible for owing the lender $3500. To make it worse lenders may tack on hefty auction fees which you will owe as well. So the net result is that you are now responsible for making monthly payments on a bike you can no longer ride.

So what steps can you take to prevent from being caught &quot;up side down&quot;?

1. Find a lender that uses simple interest. Avoid lenders that use pre-computed / Rule of 78 interest calculations.

2. Always try to put money down on your purchase.

3. Try to avoid motorcycle loans that extend past 36 months.

Jay Fran is a author and publisher for a website that specializes in <a target="_new" href="http://www.motorcycle-financing-guide.com">Motorcycle Loans: High Risk OK</a>. A comprehensive resource on simple interest motorcycle financing, poor credit, new, used and bad credit motorcycle loans.

วันอังคารที่ 27 มกราคม พ.ศ. 2552

The Motorcycle Helmet You Want May Not Be As Safe As You Think!

Choosing the right Motorcycle helmet can make a difference?.

?.literally between life and death. But how does an ordinary guy in the street make an informed decision about what kind of helmets give the best protection? There are so many makes, models and styles. Not to mention DOT approved, Snell approved, ECE approved! It is enough to make you go goggle eyed when confronted with so much information.

Tests have shown that it is perfectly possible to suffer a fatal injury falling off a stationary bike if you hit your unprotected head on the kerb, so clearly choosing the right helmet is important.

But which one?

Wouldn't it be easier if someone just said, &quot;Look, when you are in a crash, you need to protect this part of you head, because this is the part that is most likely to get hurt&quot;?

Well that's what I thought. But it wasn't that easy. The kind of information you need to make that kind of call requires someone, somewhere to look at a whole bunch of motorcycle crashes, look at the motorcycle helmet damage, assess where point of impact occurred and put the information into a form that allows ordinary motorcyclists (like you and me) to make a decision for themselves.

However, the good news is that if you look hard enough, the information is available. A study was carried out a few years ago by Deitmar Otte, at the Medizinsche Hochschule in Hannover, Germany on the damage incurred to helmets worn by motorcyclists involved in accidents. His analysis was extremely detailed; in fact it was far to detailed for me to go into here, but it was extremely important.

What I am going to do is tell you in a nutshell, what parts of your head are most likely to be hurt in a motorcycle accident, based on Herr Otte's findings. The rest is up to you?

Take a motorcycle helmet and look at it from the front. Now imagine it is divided into three sections; the top (the cranium area) the middle (the area most likely covered by the visor) and the bottom (on a full face helmet, this would be the chin guard area). If you were involved in a motorcycle accident, and you hit your head you would have a 35% chance of the impact occurring to your chin area, 10% to your visor area, and 22% chance of the impact occurring to your front cranium area.

Now turn the helmet around. Looking at it from the back, divide it in two down the middle. In an accident, if you hit you head, you have a 16% chance of impact occurring on the back of you head to the left side, and a 17% chance of impact occurring on the back right side.

Conclusion? Well, this is only my personal conclusion but I would say the following?

The safest helmets are full face helmets?

Second would be three quarter helmets with visors?

Third would be half helmets?

Last would be novelty helmets.

There are lots of reasons people wear helmets. However, if safety is you main consideration, then take a good look at the full face helmets on the market, take some time and find one which you can wear comfortably on every ride.

Michael Holmes is a enthusiast for all thing motorcycle. His website, <a target="_new" href="http://www.motorcycleparts-accessories-andmore.com">http://www.motorcycleparts-accessories-andmore.com</a>, is a great resource of articles aimed at motorcyclists of all levels, including a page specifically for <A target="_new" HREF="http://motorcycleparts-accessories-andmore.com/cheapmotorcyclehelmets.html" >cheap motorcycle helmets.</A>

Motorcycle Suspension Setup: Getting to Grips with a Black Art

Suspension Set-up: The basics

Whether you are a road rider or a racer correct suspension setup is the key to fast smooth riding and consistent lap times. To get the best out of your bike it needs to be set up for the conditions in which you will be riding. It is considerably easier to set the bike up for the Track as you know what conditions will be like for the next hour or so and thus you can dial in the optimum settings for the that particular situation.

To what extent you change your suspension settings will depend on whether your bike will also have to cope with riding on the road. Unlike Roads Tracks are generally smooth and grippy. So if you are only going to use the bike on the track you have the luxury of fitting harder springs and modifying the fork and shock internals. If you ride on the road as well as the track you will probably want to keep a certain comfort level and concentrate on just optimizing the current equipment

With incorrect suspension setup, tire wear is increased and handling suffers, which in turn can result in rider fatigue. Lap times can be dramatically slower and in extreme cases safety can be compromised. Hopefully the following guide will help you dial in your suspension for faster and safer riding both on and off the track.

Firstly you will need to check the Fork and Shock sag: this is the amount the forks and rear shock settle under load. To measure it do the following: push down on the forks a number of times to settle them, then mark the stanchion with a felt pen or put a cable tie where the dust seal is sitting. Next ask some for help to lift on the bars so the front wheel is just off the ground and measure the amount the forks have traveled down. This is the static sag (or unladen sag), This can be changed by adjusting the spring preload (more preload = less sag). Repeat the same process for the rear, this time measuring the distance from the wheel spindle to a fixed point on the tail. Now you are ready to begin setting up your suspension. The key is to do it a little at a time and make notes as you go. For road riding start with the wet track settings and work from there.

Basic Setup: Check the following

Forks sag 18-22 mm for dry track, 23-27mm for rain.

Shock sag 8-10mm for dry track, 10-14mm for rain.

Check chain alignment. If not correct, bike will crab walk and sprocket wear will be increased.

Proper tire balance and pressure, starting with 30psi front and 32psi rear (both dry and wet).

Steering head bearings and torque specifications - if too loose, there will be head shake at high speeds.

Front-end alignment. Check wheel alignment with triple clamps. If out of alignment, fork geometry will be incorrect and steering will suffer.

Crash damage, check for proper frame geometry.

Stock Suspension Tuning Limitations

Manufacturers plan on designing a bike that works moderately well for a large section of riders and usages. To accomplish this as economically as possible, they use valving with very small venturis. These are then matched to a very basic shim stack which creates a damping curve for the given suspension component. At slower speeds this design can work moderately well, but at higher speeds, when the suspension must react more quickly, the suspension will not flow enough oil, and will experience hydraulic lock. With hydraulic lock, the fork and/or shock cannot dampen correctly and handling suffers. The solution is to re-valve the active components to gain a proper damping curve. It does not matter what components you have, (Ohlins, Fox, Kayaba, Showa) matching them to your intended use and weight will vastly improve their action. Furthermore, if you can achieve the damping curve that is needed, it does not matter what brand name is on the component. Often with stock components, when you turn the adjusters full in or out, you do not notice a difference. In part, this is due to the fact that the manufacturer has put the damping curve in an area outside of your ideal range. Also, because the valves have such small venturis, the adjuster change makes very little difference. After re-valving, the adjusters will be brought into play, and when you make an adjustment, you will be able to notice that it affects the way the way the fork or shock performs.

Another problem with stock suspension is the springs that are used. Often they are progressive, increasing the spring rate with increased compression distance. This means that the valving is correct for only one part of the spring's travel, all other is compromise. If the factory does install a straight-rate spring, it is rarely the correct rate for the weight of the rider with gear. The solution is to install a straight-rate spring that matches the valving for the combined weight of the bike, rider and gear to the type of riding intended.

Remember!

? Always make small adjustments, more is not always better.

? Always keep notes of what you have done.

? Suspension tuning is an art - be patient

Mark Thompson has spent the last 20 Years Racing motorcycles and managing Race Teams. He now runs the <a target="_new" href="http://www.trackbikes.co.uk">Trackbikes</a> website.

Workings of a Motorcycle Muffler Suspension

Motorcycles are becoming more popular because of its convenience and relatively inexpensive cost compared to automobiles. They are capable of the same speeds as cars and can also be licensed for use on public highways.

Owners and drivers of motorcycles opt for these motorized, two-wheeled vehicles as transportation because aside from it being an inexpensive alternative to cars, they can be easily maneuvered and they deliver higher fuel economy. In addition, they take less space for parking. No wonder a lot of Asian countries have more motorcycles than cars.

And for drivers who love speed, motorcycles are great vehicles because they can accelerate more quickly than an automobile. Nevertheless, motorcycles are not for everybody. Riding and controlling this vehicle requires skill and extra caution especially during difficult maneuverings on wet or slick surfaces.

But when you do get the urge to ride a motorcycle, you would want to learn a lot of information on the vehicle, like "Where do I start?"; "How do I start my motorcycle?"; "Do I need to shift gears?" "If so, how do I do it?" And most of all, any beginner would want to know first the makings and basic parts of a motorcycle and how they work.

One author wrote that to give steps on how to start a motorcycle on a hill involves a tremendous number of motorcycle parts. And it doesn't matter if its aftermarket motorcycle parts or OEM, once a new rider begins to learn to ride it, he or she must also be able to identify which part is which, or how to operate the basic procedures for riding a motorcycle.

One of the most important and popular part of a motorcycle is the muffler. Other than the tires, the body, the most well known part I believe is the muffler. The motorcycle muffler includes all pipes and baffles needed to reduce, if not quiet, the exhaust noise. It is also used to match with the carburetor jetting. Most often than not, factory mufflers are changed to aftermarket pipes to tailor to the specifications of the user according to sound and performance.

However, not all motorcycles have the same parts in the same places. Each motorcycle, whether they have aftermarket motorcycle parts or OEM, has its own names for its parts and even the way that the parts are interconnected may be different. It's up to you, the rider, to identify these parts according to the model and brand of the motorcycle you're going to use.

Granny's Mettle is a 30-something, professional web content writer. She has created various web content on a diverse range of topics, which includes digital printing topics, medical news, as well as legal issues. Her articles are composed of reviews, suggestions, tips and more for the printing and designing industry.

Her thoughts on writing: "Writing gives me pleasure? pleasure and excitement that you have created something to share with others. And with the wide world of the Internet, it gives me great satisfaction that my articles reach more people in the quickest time you could imagine."

On her spare time, she loves to stay at home, reading books on just about any topic she fancies, cooking a great meal, and taking care of her husband and kids.

For comments and inquiries about the article visit <a target="_new" href="http://www.motorcyclepartsbin.com">http://www.motorcyclepartsbin.com</a>

Motorcycle Parts - OEM or Aftermarket ?

This is always a difficult one to answer when shopping for motorcycle parts and I firmly believe that each one of us must decide what's best for our bikes AFTER carefully evaluating each of the possibilities.

For me?

Well... it really depends on what I am looking for - just replacement or improvement - , the availability of the part, my budget and other things. Sometimes I buy OEM, others aftermarket motorcycle parts.

Keep reading. You will find some views that will hopefully help you decide the next time you shop for motorcycle parts.

What a heck are OEM parts??

OEM parts stands for Original Equipment Manufacturer parts which not necessarily mean the OM (Original Manufacturer) actually produced them. You know, many motorcycle and automobile manufacturers don't manufacture each of the parts used in their vehicles. They frequently have the parts designed and manufactured by outside independent companies and then, install them in their machines or put them in their own boxes to be sold as OEM parts!

Good to know when buying OEM Motorcycle Parts:

When you buy OEM Motorcycle Parts you are buying the exact same original part the manufacturer used to build your motorcycle, that means:

>> Same performance as the part installed in your motorcycle right now. The part won't be better nor worse than the original part you want to replace.

>> Normally OEM parts a more (in some cases MUCH more) expensive than aftermarket parts.

>> Motorcycle and car agencies clerks will normally tell you OEM Parts are higher quality and the best option for replacements. Is this true? Well sometimes it is, sometimes it's not.

>> Normally after a certain period of time, the manufacturer will allow the company that originally designed/produced the part to sell it in their own box at a considerably lower cost, making it: an Aftermarket OEM part! :-)

>> BE CAREFUL if your bike is still in its guarantee period make sure you use only OEM parts and have them installed by authorized mechanics. If you don't do so, you will probably void the guarantee.

What about Aftermarket parts??

Aftermarket parts should perform as well as OEM parts but are produced by companies other than the original manufacturer(s).

Things to know when buying Aftermarket Motorcycle Parts:

>> MAKE SURE YOUR GUARANTEE PERIOD IS OVER. In many cases, you can VOID your guarantee if you have an aftermarket part installed by an unauthorized mechanic in your machine. I know I said it before, but it's worth repeating; I happened to me! :-(

>> Equivalent aftermarket Suzuki motorcycle parts are normally cheaper than OEM parts. Sometimes up to 70% cheaper!

>> Aftermarket parts can have lower,the same or higher quality than the original.

>> When buying aftermarket parts make sure you are getting AT LEAST the same quality as the OEM part. If possible try to get some reviews about brands and performance. You can do it in the Internet, with your favorite mechanic or with fellow riders.

>> If you are looking for high performance parts and devices, you know the kind: carbon fiber, titanium, aerospace aluminum parts and gizmos, well you will probably find them as aftermarket motorcycle parts.

OEM or aftermarket motorcycle parts, sooner or later you will be shopping for them...

Enjoy the ride!

Daniel Levy

Daniel Levy is the owner and contributing writer of <a target="_new" href="http://www.Japanese-Motorcycles-Only.com">http://www.Japanese-Motorcycles-Only.com</a> . He loves motorcycles and Web development. For more great info visit <a target="_new" href="http://www.japanese-motorcycles-only.com/">http://www.japanese-motorcycles-only.com/</a>

If you need motorcycle parts, check out BikeBandit: my favorite online store for motorcycle parts. You will find a full review of their business in this page:<a target="_new" href="http://www.japanese-motorcycles-only.com/bike-bandit.html">http://www.japanese-motorcycles-only.com/bike-bandit.html</a>