วันพฤหัสบดีที่ 18 กันยายน พ.ศ. 2551

Mini Moto Tips

Here are some quick adjustments and tips for B1-cooled liquid Minimoto I found useful. Additional thermal protection: To protect the bike I put a few strips of aluminum inside the fairing on the nearest point of the exhaust and lower fuel tank. I? See do so because the engine is hot for what I wanted to protect the fairing of a merger, and it does hurt, to protect the fuel tank for the same reasons! My cooling tips: When you miss coolant his representative B1, use distilled water which is available in your garage, add a little food coloring, so you can tell the level and you go away. Just fill the tank of a fourth full, is simply the cooling water, which leaves room for the press. Once you've filled the tank of cooling water, it is often chambers of air into the system. To get rid of these start the bike and let you warm up, then turn on a bicycle (cautiously) to the rear of a bicycle tire vertically. To do this, a number of times, it should get rid of Chambers of air into the system, and to avoid overheating. The level of cooling water needed May, led to this day. If not, go to: Hi just bought my new B1-cooled air from you. Thank you is a great bike. A small word of advice to other clients. Do not drive his mini-motorcycle on the road. My friend (who also mounted a mini-motorcycle, but on the ground where they are supposed to be killed!) Is a man of Police (boooo!) The law is very strict: the driver or the driver of a motorcycle or Road board meeting heavy fines, license endorsement, disqualification and in the case of dangerous driving, up to 2 years in prison. Keep in mind that the term includes not only a carriageway of the road, but also sidewalks and legal guardians, as well as some road that covers paths, bridleways and corridors. It May also include the paths of private property that the public has access, and in some cases, including parking? Hotel Warriors pass !!!??? Here's good advice. Before mounting his mini-motorbike will have to make sure the chain and the wheels are aligned. Here's how. Loosen the screws on the rear wheel, so you can move. Place a piece of wood perfectly straight (he used a meter stick) against the front wheel. When the front right wheel is the meter stick should be hunting against the front wheel back. Here is a simple question of the tail the rear wheel. Channels should also be right. Reorient mini-moto is simple. A first tooth largest combined with a little behind the tooth to create a small proportion, it means that the Mini Moto will have fewer but better accelelaration spead. A small dent in front tooth with a better return on their mini-Moto fastest acceleration, but more slowly. Below are the variations possible to say: More from accelerating faster. The largest percentage, the higher the speed limit. 8 / 54 6.75> 1
8 / 56 7> 1
8 / 58 7.25> 1
8 / 60 7.5> 1
7 / 54 7 , 714285714> 1
8 / 62 7.75> 1
7 / 56 8> 1
8 / 64 8> 1
7 / 56 8> 1
8 / 66 8.25> 1
7 / 58 8.285714286> 1
8 / 68 8.5> 1
7 / 60 8.571428571> 8
1 / 70 8.75> 1
7 / 62 8.857142857> 1
8 / 72 9> 1
6 / 54 9> 1
7 / 64 9.142857143> 1
8 / 74 9.25> 1
6 / 56 9.333333333> 1
7 / 66 9.428571429> 1
8 / 76 9.5> 1 < br> 6 / 58 9.666666667> 1
7 / 68 9.714285714> 1
8 / 78 9.75> 1
6 / 60 10> 1
7 / 70 10> 1
7 / 72 10.28571429> 1
6 / 62 10.33333333> 1
7 / 74 10.57142857> 1
6 / 64 10.66666667> 1 < br> 7 / 76 10.85714286> 1
6 / 66 11> 1
7 / 78 11.14385714> 1
6 / 68 11.33333333> 1
6 / 70 11.66666667> ,, 1;
6 / 72 12> 1
6 / 74 12.33333333> 1
6 / 76 12.66666667> <br 1> 6 / 78 13> 1, I tried 7 / 56 Rep B1 with my GP Karting, I think that's about right to the runway as in cards tight corner. I could go to Stretton soon so that you can do my 7 / 68. This should be good for the lines, but May take some time to get the speed! Matt Tong was the importation of horses and miniature motorcycles for two years. For expert advice and Mini Moto information, please visit http://www.minimotosandmore.com http://www.minimotosandmore.com

ไม่มีความคิดเห็น: